RHEL6環境で、varnishのmake後のテストがコケル問題（未解決）

Scientifix6でvarnishを使用しようとしてたら、make後のtestでFAILEDしてしまうので、どうしようかと悩んでいます。
（varnish本家のサイト見たのですが、バグ報告？？ってどうしたらいいのかわからなかった。。。Tracのアカウント作れないし。。。）

■環境
Scientifx6 x86_64
インストールは BasicServerに開発環境を足しただけ。
varnish-2.1.5 (2.1.4-4もダメでした）

ちなみに、CentOS5.5では2.1.4-4は問題なくエラーなし。

■インストール方法と、エラー内容

rpmbuild -ta varnish-2.1.5.tar.gz
ソースコンパイルもダメ（当たり前か）

とりあえず、ソースコンパイル後の流れを。。。

tar xzvf varnish-2.1.5
cd varnish-2.1.5
sh autogen.sh
sh configure
make -j8
cd bin/varnishtest && ./varnishtest tests/*.vtc

で、テストをすると。。。

#    top  TEST tests/a00000.vtc passed (0.001s)
#    top  TEST tests/a00001.vtc passed (0.001s)
#    top  TEST tests/a00002.vtc passed (0.001s)
#    top  TEST tests/a00003.vtc passed (0.001s)
#    top  TEST tests/a00004.vtc passed (0.001s)
#    top  TEST tests/a00005.vtc passed (0.002s)
#    top  TEST tests/a00006.vtc passed (0.001s)
#    top  TEST tests/a00007.vtc passed (0.001s)
#    top  TEST tests/a00008.vtc passed (1.803s)
#    top  TEST tests/a00009.vtc passed (0.137s)
#    top  TEST tests/a00010.vtc passed (0.001s)
#    top  TEST tests/b00000.vtc passed (0.544s)
#    top  TEST tests/b00001.vtc passed (0.633s)
#    top  TEST tests/b00002.vtc passed (0.635s)
#    top  TEST tests/b00003.vtc passed (0.628s)
#    top  TEST tests/b00004.vtc passed (1.236s)
#    top  TEST tests/b00005.vtc passed (0.624s)
#    top  TEST tests/b00006.vtc passed (0.537s)
#    top  TEST tests/b00007.vtc passed (0.530s)
#    top  TEST tests/b00008.vtc passed (1.102s)
#    top  TEST tests/b00009.vtc passed (0.629s)
#    top  TEST tests/b00010.vtc passed (0.528s)
#    top  TEST tests/b00011.vtc passed (0.542s)
#    top  TEST tests/b00012.vtc passed (0.539s)
#    top  TEST tests/b00013.vtc passed (0.631s)
#    top  TEST tests/b00014.vtc passed (0.589s)
#    top  TEST tests/b00015.vtc passed (1.533s)
#    top  TEST tests/b00016.vtc passed (0.698s)
#    top  TEST tests/b00017.vtc passed (0.541s)
#    top  TEST tests/b00018.vtc passed (0.538s)
#    top  TEST tests/b00019.vtc passed (0.642s)
#    top  TEST tests/b00020.vtc passed (3.056s)
#    top  TEST tests/b00021.vtc passed (3.038s)
#    top  TEST tests/b00022.vtc passed (3.054s)
#    top  TEST tests/b00023.vtc passed (2.542s)
#    top  TEST tests/b00024.vtc passed (2.546s)
#    top  TEST tests/b00025.vtc passed (2.533s)
#    top  TEST tests/b00026.vtc passed (3.216s)
#    top  TEST tests/b00027.vtc passed (0.534s)
#    top  TEST tests/b00028.vtc passed (0.546s)
#    top  TEST tests/b00029.vtc passed (3.534s)
#    top  TEST tests/b00030.vtc passed (0.632s)
#    top  TEST tests/b00031.vtc passed (0.537s)
#    top  TEST tests/b00033.vtc passed (0.590s)
#    top  TEST tests/c00001.vtc passed (0.540s)
#    top  TEST tests/c00002.vtc passed (0.612s)
#    top  TEST tests/c00003.vtc passed (0.656s)
#    top  TEST tests/c00004.vtc passed (0.543s)
---- s1   EXPECT req.url (foo) == / (/) failed
---- c1   HTTP rx failed (poll: Success)
#    top  TEST tests/c00005.vtc starting
#    top  TEST Test simple ACL
##   s1   Starting server
#### s1   macro def s1_addr=127.0.0.1
#### s1   macro def s1_port=45550
#### s1   macro def s1_sock=127.0.0.1 45550
#    s1   Listen on 127.0.0.1 45550
##   s1   Started on 127.0.0.1 45550
##   v1   Launch
###  v1   CMD: cd ../varnishd && ./varnishd -d -d -n /tmp/vtc.28077.6b8b4567/v1 -p auto_restart=off -p syslog_cli_traffic=off -a '127.0.0.1:0' -S /tmp/vtc.28077.6b8b4567/v1/_S -M '127.0.0.1 54717' -P /tmp/vtc.28077.6b8b4567/v1/varnishd.pid -sfile,/tmp/vtc.28077.6b8b4567/v1,10M  -p vcl_trace=on
###  v1   debug| storage_file: filename: /tmp/vtc.28077.6b8b4567/v1/varnish.jZdWbg size 10 MB.\n
###  v1   debug| Creating new SHMFILE\n
###  v1   debug| Varnish on Linux,2.6.32-71.el6.x86_64,x86_64,-sfile,-hcritbit\n
###  v1   debug| 200 237     \n
###  v1   debug| -----------------------------\n
###  v1   debug| Varnish Cache CLI 1.0\n
###  v1   debug| -----------------------------\n
###  v1   debug| Linux,2.6.32-71.el6.x86_64,x86_64,-sfile,-hcritbit\n
###  v1   debug| \n
###  v1   debug| Type 'help' for command list.\n
###  v1   debug| Type 'quit' to close CLI session.\n
###  v1   debug| Type 'start' to launch worker process.\n
###  v1   debug| \n
###  v1   CLI connection fd = 6
###  v1   CLI RX  107
#### v1   CLI RX| ajgdravommzxjukhramsxkxwoylxkiek\n
#### v1   CLI RX| \n
#### v1   CLI RX| Authentication required.\n
#### v1   CLI TX| auth 03a4b3a2aa42a6fef7294611077446a1f00df09ac7e3d2602eeb7ff27c250024\n
###  v1   CLI RX  200
#### v1   CLI RX| -----------------------------\n
#### v1   CLI RX| Varnish Cache CLI 1.0\n
#### v1   CLI RX| -----------------------------\n
#### v1   CLI RX| Linux,2.6.32-71.el6.x86_64,x86_64,-sfile,-hcritbit\n
#### v1   CLI RX| \n
#### v1   CLI RX| Type 'help' for command list.\n
#### v1   CLI RX| Type 'quit' to close CLI session.\n
#### v1   CLI RX| Type 'start' to launch worker process.\n
#### v1   CLI TX| vcl.inline vcl1 << %XJEIFLH|)Xspa8P\n
#### v1   CLI TX| backend s1 { .host = "127.0.0.1"; .port = "45550"; }\n
#### v1   CLI TX| \n
#### v1   CLI TX| \n
#### v1   CLI TX| \tacl acl1 {\n
#### v1   CLI TX| \t\t"localhost";\n
#### v1   CLI TX| \t}\n
#### v1   CLI TX| \n
#### v1   CLI TX| \tsub vcl_recv {\n
#### v1   CLI TX| \t\tif (client.ip ~ acl1) {\n
#### v1   CLI TX| \t\t\tset req.url = "/";\n
#### v1   CLI TX| \t\t}\n
#### v1   CLI TX| \t}\n
#### v1   CLI TX| \n
#### v1   CLI TX| %XJEIFLH|)Xspa8P\n
###  v1   CLI RX  200
#### v1   CLI RX| VCL compiled.
#### v1   CLI TX| vcl.use vcl1
###  v1   CLI RX  200
##   v1   Start
#### v1   CLI TX| start
###  v1   debug| child (30102) Started\n
###  v1   debug| Child (30102) said \n
###  v1   CLI RX  200
#### v1   CLI TX| debug.xid 1000
###  v1   debug| Child (30102) said Child starts\n
###  v1   debug| Child (30102) said managed to mmap 10485760 bytes of 10485760\n
###  v1   CLI RX  200
#### v1   CLI RX| XID is 1000
#### v1   CLI TX| debug.listen_address
###  v1   CLI RX  200
#### v1   CLI RX| 127.0.0.1 55686\n
##   v1   Listen on 127.0.0.1 55686
#### v1   macro def v1_addr=127.0.0.1
#### v1   macro def v1_port=55686
#### v1   macro def v1_sock=127.0.0.1 55686
##   c1   Starting client
##   c1   Waiting for client
###  c1   Connect to 127.0.0.1 55686
###  c1   Connected to 127.0.0.1 55686 fd is 9
#### c1   txreq| GET foo HTTP/1.1\r\n
#### c1   txreq| \r\n
###  c1   rxresp
###  s1   rxreq
#### s1   rxhdr| GET foo HTTP/1.1\r\n
#### s1   rxhdr| X-Forwarded-For: 127.0.0.1\r\n
#### s1   rxhdr| X-Varnish: 1001\r\n
#### s1   rxhdr| Host: 127.0.0.1\r\n
#### s1   rxhdr| \r\n
#### s1   http[ 0] | GET
#### s1   http[ 1] | foo
#### s1   http[ 2] | HTTP/1.1
#### s1   http[ 3] | X-Forwarded-For: 127.0.0.1
#### s1   http[ 4] | X-Varnish: 1001
#### s1   http[ 5] | Host: 127.0.0.1
#### s1   bodylen = 0
---- s1   EXPECT req.url (foo) == / (/) failed
---- c1   HTTP rx failed (poll: Success)
#    top  RESETTING after tests/c00005.vtc
##   s1   Waiting for server
#### s1   macro undef s1_addr
#### s1   macro undef s1_port
#### s1   macro undef s1_sock
##   v1   Wait
##   v1   R 30077 Status: 0000
#    top  TEST tests/c00005.vtc FAILED

という感じ。コンパイル通ってるから使えそうなもんですが、気持ち悪いのと、どうしたらいいのか。。。
どなたかご教授頂けると幸いです。。。

あと、Varnishの日本語化をされようとしている方がいらっしゃいました！！
http://takanori.bitbucket.org/varnish-doc-ja/index.html
https://bitbucket.org/takanori/varnish-doc-ja

今の翻訳作業が終わったら、お手伝いしようと心に誓っております！！(> <)
レベルは低いですが。。。